Single and three phase versions available

Current reversal indication

LED indication proportional to kWh for on-spot calibration

Six digit counter

Dust proof body, rugged construction, elegant polycarbonate casing

Not affected by mounting position

Not affected by external magnetic field

Earth load tamper indication in single phase energymeter
Three phase energymeters work even on neutral removal

0.2 / 0.5 / 1.0 class accuracy

Multi tariff capability with programmable TOD

Three programmable maximum demand (MD) registers

Tamper / failure detection and record capability

Communication interface via optical port conforming to

IEC 1107 protocol/RS 2321RS 485

Battery back-up for data collection

Available in projection ft flush mounting versions

0.5 / 1.0 class accuracy

User friendly software for PC operation

Communication interface via RS485 port and MODBUS protocol

Back lit LCD display

Front panel programming

Flush mounting - 96mm X 96mm overall size (Cutout size-92mm X 92mm)

Compact and light M/s L & Tight

Class I accuracy as per IS 13779

LED indication proportional to kWh for on spot calibration

Meter records correct energy
(a) Irrespective of current direction
(b) Balance and unbalance condition with any phase sequence

All instantaneous and cumulative values

Flush mounting - 96mm X 96mm overall size (cutout size-92mm X 92mm)

Class I accuracy

Separate display of fundamental and total harmonic values for currents and voltages of all phases

Front panel programing

Communication interface via RS 485 port ft MODBUS protocol

4 output outputs for early alarms and tripping of non-essential loads

MD control by monitoring rising demand

0.5 / 1.0 class accuracy

User friendly software for PC operation

Communication interface via RS 485 port & MODBUS protocol